Corrosion–Wear Tester
Study combined corrosion and abrasive wear as rotating specimens interact with particles suspended in a slurry containing a corrosive medium.
MATERIAL FRICTION & WEAR
Capabilities
- Vary specimen geometry, speed and slurry composition for material-selection studies.
- User-supplied electrochemical instrumentation can support corrosion measurements.
- Heating and temperature-control accessories enable temperature-effect studies.
Selected specifications
| Maximum spindle speed | 2,900 r/min |
|---|---|
| Rotation direction | Clockwise |
| Pin specimen | 8 mm diameter × 53 mm effective length |
| Ring specimen | 50 mm diameter × 10 mm |
Confirm the final configuration and operating limits with our team for your specific test method.
← Browse Material Friction & WearRelated instruments
3 models / items
Rolling Contact Fatigue & Wear Tester
Study contact-fatigue wear under rolling or combined rolling–sliding motion, with or without oil lubrication. Applications include materials for gears, bearings, rolls and rails.
View model details →
High-Temperature End-Face Friction & Wear Tester
Evaluate material friction and wear using end-face sliding contact between annular specimens under elevated load, at room or high temperature.
View model details →
Computer-Display Friction & Wear Tester
Test metallic and non-metallic materials under sliding, rolling, combined rolling–sliding and intermittent contact. Configurations support dry, wet and abrasive wear studies.
View model details →